PoE Switch VARIODYN D1

583396 | PoE Switch VARIODYN D1

PoE switch for connecting the Ethernet Touch station ETCS (583527) to the VARIODYN D1,

including the power supply of ETCS via PoE. The PoE switch can be used for single or redundant topologies. Wide input voltage range: 12V/24V/48VDC (12V ... 56V DC),

PoE switch according to IEEE802.3. 4. Port Gigabit POE injector, 4x10/100/1000M TX PSE (802.3af/at POE+), 2x100/1000M SFP, industry standard. Regulation of the internal voltage from 12/24/48V DC to 55 VDC,

The PoE switch is equipped with Cold Design Technology to reach the output voltage of 55V DC with a very good efficiency and extremely low heat dissipation, even with very low input voltage. LED indicators to display the current status and DIP switches for settings.

Part-No.:
583396

Features

IEEE Standard

IEEE 802.3 10Base-­‐‑T Ethernet IEEE 802.3u 100Base-­‐‑TX Fast Ethernet IEEE 802.3ab 1000Base-­‐‑T Gigabit Ethernet IEEE 802.3z 1000Base-­‐‑X Gigabit Ethernet IEEE802.3x Flow Control and Back Pressure IEEE802.3af for POE IEEE802.3at for POE+

Alarm Relay Contact

Relay outputs with current carrying capacity of 1 A @ 24VDC

POE power

POE power per port 30watts. Maximum 36Wattsper port at 12/24/48VDC input Maximum total power 126Watts at 24VDC and 48VDC power input Maximum total power 65W at 12VDC power input

Installation

Installation mounting DIN Rail mounting and Wall Mounting

Technical Data

Rated voltage 
V AC
Input-Clipping 
Verzerrung bei -3dB unter Nennleistung (ohmsche Last) 
Indication Output voltage 
Alle Kanäle auf Batterienennspannung geladen 
Alle Kanäle werden mit Netznennspannung geladen 
Betriebsarten 
Frequency 
Versorgungsspannung_a 
Eigenschwingungsfrequenz im Ruhezustand 
Effizienz bei maximaler Last 
Eingangsimpedanz (symmetrisch) 
Eingangsempfindlichkeit 
Spannungsverstärkung 
Maximale Tragfähigkeit 
Verzerrung bei Nennleistung (ohmsche Last) 
Frequenzgang bei Nennleistung 
Vorgang Klasse D 
Temperaturkompensationsfaktor für Batterieladegerät 
Schutz vor tiefer Batterieentladung 
Starten des Ladegeräts 
Impedanz der Batteriequelle 
Strombegrenzung des Batterieladegeräts 
Kapazität der ventilgeregelten Blei-Säure-Batterie 
Zulassung/Zertifizierung VDE, Semko (EN 60934) 
Isolationswiderstand 
Stehspannung Prüfspannung 
Shutdown 
Operating life 
Kontrolllampe 
Rated current 
Signal Rausch Verhältnis 
Frequenzbereich_fr 
kHz
Leitungsspannung 
Lautsprecher_Line_Modul 
Spitzenspannungswiderstand 
max_Schaltkontaktstrom 
max_Schaltkontaktspannung 
Lastimpedanz min. 
SNR 
THD 
max_Ausgangspegel_FR 
Audio Ausgangskanäle 
Ausgabetype 
Max. Power per module 
Audio latenzy 
Output channels 
Audio Transmission Format 
Ethernet 
Output impedance 
Frequency response 
Nominal output level 
Audio output: 
Interference Voltage DistanceLine 
Interference voltage ratioMicrophone 
frequency response line 
frequency response microphone 
Nominal line input level 
Nomminal input levvel microphone 
audio input channels 
Short-circuit proof against + 24 V 
load current per output 
input resistance 
input voltage logical 0 
input voltage 1 
Input voltage 
audio storage 
Encoder/Decoder 
Sampling rate 
Voltage supply 
Power consumption 
Max. external voltage 
V DC
Voltage of loudspeaker output 
Max. number of lines per moduel 
Max Power per line 
Max. number of modules per INC 
Operation temperature 
Channel separation 
Distortion factor @ 1 kHz 
Approval 
Efficiency 
Signal to noise ratio 
Input level 
Output power *8 
Current (1 kHz sinus/1 min.) @ 24 V DC *7 
Rated current @ 230 V AC *6 
Rated current @ 24 V DC*6 
Rated frequency 
Emergency power supply 
V DC
Technology 
Operating voltage 
V DC
Operating voltage 
Current consumption @ 12 V DC 
Current consumption @ 24 V DC 
Power consumption 
5,76 W
Rated voltage 
Redundant Dual DC 12V … 56V Power Input
Output voltage 
V AC
Output current 
A
Contact load relay 
 
Data transmission speed 
Transmission distance 
Transmission range 
System input impedance 
Channel separation 
dB
Harmonic distortion at nominal level 
Sensitivity 
mV
Sound level 
dB
Impedance 
Ω
Fiber 
Ambient temperature 
-40 °C ... 75 °C
Storage temperature 
-40 °C ... 85 °C
Air humidity 
< 93 % (non-condensing)
Air humidity 
Type of protection 
IP 30
Housing 
Rugged Metal
Color 
 
Mounting 
Weight 
Weight 
 
Dimensions 
W: 43 mm D: 105 mm L: 142 mm
 
 
Declaration of Performance 
Output current (idle) 
Output current (alarm) 
Emergency power supply 

Downloads

Produktdatenblatt
Ausschreibungstext

Product Data Sheet

Version: 2024-12

Language:
English
Doc extension:
pdf