Features
- Increased safety compared to spur cabling
- Fully redundant 100 V loop wiring system technology
- Extensive topologies are possible
- Silent monitoring of speaker loop
- EN 54-16 certified
Loop Driver Module LDM
Loop driver module compatible with the VARIODYN ONE system. It allows the connection and monitoring of loop-style speaker circuits. Predisposed to be installed on a DIN rail (C bar). One LDM per Loop is required. RS-485 protocol for interfacing to the VARIODYN INC (Intelligent Network Controller).
- Part-No.:
- 585343
- Approval:
- Approval: EN 54-16
Technical Data
- Rated voltage
- V AC
- Input-Clipping
- Verzerrung bei -3dB unter Nennleistung (ohmsche Last)
- Indication Output voltage
- Alle Kanäle auf Batterienennspannung geladen
- Alle Kanäle werden mit Netznennspannung geladen
- Betriebsarten
- Frequency
- Versorgungsspannung_a
- Eigenschwingungsfrequenz im Ruhezustand
- Effizienz bei maximaler Last
- Eingangsimpedanz (symmetrisch)
- Eingangsempfindlichkeit
- Spannungsverstärkung
- Maximale Tragfähigkeit
- Verzerrung bei Nennleistung (ohmsche Last)
- Frequenzgang bei Nennleistung
- Vorgang Klasse D
- Temperaturkompensationsfaktor für Batterieladegerät
- Schutz vor tiefer Batterieentladung
- Starten des Ladegeräts
- Impedanz der Batteriequelle
- Strombegrenzung des Batterieladegeräts
- Kapazität der ventilgeregelten Blei-Säure-Batterie
- Zulassung/Zertifizierung VDE, Semko (EN 60934)
- Isolationswiderstand
- Stehspannung Prüfspannung
- Shutdown
- Operating life
- Kontrolllampe
- Rated current
- Signal Rausch Verhältnis
- Frequenzbereich_fr
- kHz
- Leitungsspannung
- Lautsprecher_Line_Modul
- Spitzenspannungswiderstand
- max_Schaltkontaktstrom
- max_Schaltkontaktspannung
- Lastimpedanz min.
- SNR
- THD
- max_Ausgangspegel_FR
- Audio Ausgangskanäle
- Ausgabetype
- Max. Power per module
- Audio latenzy
- Output channels
- Audio Transmission Format
- Ethernet
- Output impedance
- Frequency response
- Nominal output level
- Audio output:
- Interference Voltage DistanceLine
- Interference voltage ratioMicrophone
- frequency response line
- frequency response microphone
- Nominal line input level
- Nomminal input levvel microphone
- audio input channels
- Short-circuit proof against + 24 V
- load current per output
- input resistance
- input voltage logical 0
- input voltage 1
- Input voltage
- audio storage
- Encoder/Decoder
- Sampling rate
- Voltage supply
- Power consumption
- Max. external voltage
- V DC
- Voltage of loudspeaker output
- Max. number of lines per moduel
- Max Power per line
- Max. number of modules per INC
- Operation temperature
- Channel separation
- Distortion factor @ 1 kHz
- Approval
- Efficiency
- Signal to noise ratio
- Input level
- Output power *8
- Current (1 kHz sinus/1 min.) @ 24 V DC *7
- Rated current @ 230 V AC *6
- Rated current @ 24 V DC*6
- Rated frequency
- Emergency power supply
- V DC
- Technology
- Operating voltage
- V DC
- Operating voltage
- Current consumption @ 12 V DC
- Current consumption @ 24 V DC
- Power consumption
- W
- Rated voltage
- Output voltage
- V AC
- Output current
- A
- Contact load relay
- Data transmission speed
- Transmission distance
- Transmission range
- System input impedance
- Channel separation
- dB
- Harmonic distortion at nominal level
- Sensitivity
- mV
- Sound level
- dB
- Impedance
- Ω
- Fiber
- Operating voltage
- Current consumption
- 200 mA (short circuit peak current < 2A)
- Ambient temperature
- Storage temperature
- Air humidity
- Air humidity
- Type of protection
- Housing
- Maximum line voltage
- Maximum line voltage (without a short circuit or partial short circuit fault)
- Maximum rated continuous current with the switch closed
- Maximum rated switching current (under short circuit)
- Maximum series impedance with the switch closed (ZC max.)
- Color
- Mounting
- Weight
- approx. 700 g
- Weight
- Dimensions
- W: 150 mm H: 55 mm D: 110 mm
- Declaration of Performance
- Output current (idle)
- Output current (alarm)
- Emergency power supply
- RS-485 baud rate
-
- 19200 bps
- 19200 bps
- RS-485 End of Line Resistor
-
- 120 Ω
- 120 Ω
- Maximum amplifier input voltage
- 100 Vrms
- Maximum amplifier rated current
- 5 Arms
- DC output voltage range
- 20 V DC… 30 V DC
- Maximum DC output current
- 300 mA
- Threshold for LIM Enablement / Disablement
- Line voltage difference <1V /Line voltage difference >1V and reset signal is received
Accessories
585342 Loop Isolator Modul LIM
Additional information
Please consider that the amplifier 4XD125B (585030) and 4XD250B (585031) are not compatible with the loop technology!
Downloads
