Features
- Much higher safety compared to spur cabling
- Fully redundant 100 V loop wiring system technology
- Extensive topologies are possible
- Short-circuit and wire break tolerant
- EN 54-17 certified
- Large saving in wiring and installation
Loop Isolator Module LIM
Loop Isolator Module to install a short-circuit and open-circuit tolerant 100 V loudspeaker loop wiring system in VARIODYN D1 loop technology. The modules monitor the current on the loudspeaker ring and disconnect in case of over-current, e.g. in the case of short-circuit, the defective part of the ring from the rest. Loop failures are displayed on DOM and VCM. Each module has a total of three two-pole terminals to connect the loop wiring system and the speakers. Wires can be connected with a section of up to 2.5 mm² to the terminals. Furthermore, a LED of its operating condition is on each module. The Loop Isolator module is housed in a stable, compact IP 66 housing with more of wiring space and is can be use in projects with difficult environmental condition, e.g. industrial use.
- Part-No.:
- 583342
- Approval:
- EN 54-17
Technical Data
- Rated voltage
- V AC
- Input-Clipping
- Verzerrung bei -3dB unter Nennleistung (ohmsche Last)
- Indication Output voltage
- Alle Kanäle auf Batterienennspannung geladen
- Alle Kanäle werden mit Netznennspannung geladen
- Betriebsarten
- Frequency
- Versorgungsspannung_a
- Eigenschwingungsfrequenz im Ruhezustand
- Effizienz bei maximaler Last
- Eingangsimpedanz (symmetrisch)
- Eingangsempfindlichkeit
- Spannungsverstärkung
- Maximale Tragfähigkeit
- Verzerrung bei Nennleistung (ohmsche Last)
- Frequenzgang bei Nennleistung
- Vorgang Klasse D
- Temperaturkompensationsfaktor für Batterieladegerät
- Schutz vor tiefer Batterieentladung
- Starten des Ladegeräts
- Impedanz der Batteriequelle
- Strombegrenzung des Batterieladegeräts
- Kapazität der ventilgeregelten Blei-Säure-Batterie
- Zulassung/Zertifizierung VDE, Semko (EN 60934)
- Isolationswiderstand
- Stehspannung Prüfspannung
- Shutdown
- Operating life
- Kontrolllampe
- Rated current
- Signal Rausch Verhältnis
- Frequenzbereich_fr
- kHz
- Leitungsspannung
- Lautsprecher_Line_Modul
- Spitzenspannungswiderstand
- max_Schaltkontaktstrom
- max_Schaltkontaktspannung
- Lastimpedanz min.
- SNR
- THD
- max_Ausgangspegel_FR
- Audio Ausgangskanäle
- Ausgabetype
- Max. Power per module
- Audio latenzy
- Output channels
- Audio Transmission Format
- Ethernet
- Output impedance
- Frequency response
- Nominal output level
- Audio output:
- Interference Voltage DistanceLine
- Interference voltage ratioMicrophone
- frequency response line
- frequency response microphone
- Nominal line input level
- Nomminal input levvel microphone
- audio input channels
- Short-circuit proof against + 24 V
- load current per output
- input resistance
- input voltage logical 0
- input voltage 1
- Input voltage
- audio storage
- Encoder/Decoder
- Sampling rate
- Voltage supply
- Power consumption
- Max. external voltage
- V DC
- Voltage of loudspeaker output
- Max. number of lines per moduel
- Max Power per line
- Max. number of modules per INC
- Operation temperature
- Channel separation
- Distortion factor @ 1 kHz
- Approval
- Efficiency
- Signal to noise ratio
- Input level
- Output power *8
- Current (1 kHz sinus/1 min.) @ 24 V DC *7
- Rated current @ 230 V AC *6
- Rated current @ 24 V DC*6
- Rated frequency
- Emergency power supply
- V DC
- Technology
- Operating voltage
- V DC
- Operating voltage
- Current consumption @ 12 V DC
- Current consumption @ 24 V DC
- Power consumption
- 0,15 W
- Rated voltage
- Output voltage
- V AC
- Output current
- A
- Contact load relay
- Data transmission speed
- Transmission distance
- Transmission range
- System input impedance
- Channel separation
- dB
- Harmonic distortion at nominal level
- Sensitivity
- mV
- Sound level
- dB
- Impedance
- Ω
- Fiber
- Operating voltage
- Current consumption
- Ambient temperature
- -20 °C ... 65 °C
- Storage temperature
- Air humidity
- Air humidity
- Type of protection
- IP 66 (housing)
- Housing
- Maximum line voltage
- Maximum line voltage (without a short circuit or partial short circuit fault)
- Maximum rated continuous current with the switch closed
- Maximum rated switching current (under short circuit)
- Maximum series impedance with the switch closed (ZC max.)
- Color
- Mounting
- Weight
- Weight
- approx. 0,22 kg
- Dimensions
- W: 114 mm H: 114 mm D: 57 mm
- Declaration of Performance
- Output current (idle)
- Output current (alarm)
- Emergency power supply
- RS-485 baud rate
- RS-485 End of Line Resistor
- Maximum amplifier input voltage
- Maximum amplifier rated current
- DC output voltage range
- Maximum DC output current
- Threshold for LIM Enablement / Disablement
Additional information
Please consider that the 4XD125B is not compatible with the loop technology!
Downloads
