Touchscreen operating unit, surface mount

FX808460 | Touchscreen operating unit, surface mount

Full active high-quality remote display and operating unit for FlexES FACP. System operation is interoperable and intuitive with a touch-sensitive 7" colored display. Individual access levels can be activated with a key code. Software addressing allows using the operating unit together with fire brigade indicating panels and fire brigade operating units on the RS 485 BUS. Mounting on-wall. A touch screen can be connected to each RS-485 interface of the FlexES Control.

Part-No.:
FX808460

Technical Data

Rated voltage 
V AC
Zertifizierung 
Leistungsaufnahme und DAS-Ausgang unter 48 V 
Leistungsaufnahme und DAS-Ausgang unter 24 V 
DAS Ausgangsspannung (nur positive Sicherheit) 
Eingang der Spannungsversorgung 
Spannungsfernbedienungseingang mit Spannungsemission 
Spannung_Fernbedienungseingang mit Stromunterbrechung 
Rated voltage 
Rated frequency 
Nominal frequency 
Hz
Rated current 
Operating voltage 
12 ... 30 V DC
Operating voltage 
V DC
Operating voltage 
Output voltage 
Rated current 
Output voltage 
Output current 
Output current 
Quiescent current 
 
Quiescent current @ 12 V DC 
Current consumption 
Current consumption 
Current consumption @ 12 V DC 
Current consumption @ 24 V DC 
approx. 500 mA
Alarm current @ 12 V DC 
Current consumption for ext. devices 
A
Belastbarkeit pro Ausgang 
Power consumption 
W
Battery 
Battery capacity 
 
Resolution 
800 x 480 pixel
Contact load relay 
Contact load 
Connection terminal 
Holding power 
N
Cable entry 
Application temperature 
Ambient temperature 
-5 °C ... 45 °C
Storage temperature 
0 °C ... 50 °C
Ambient conditions 
Air humidity 
Air humidity 
< 20 %
Type of protection 
Housing 
Material 
Color 
 
Color front plate 
Height 
Weight 
approx. 2050 g
Weight 
 
FO-Connector 
Cable length 
700 m
Cable 
Dimensions 
W: 270 mm H: 221 mm D: 71 mm
 
 
Declaration of Performance 
Specification 
Approval 
Voltage supply 
Ausgangsspannung typisch 
Power output 
W
Stromaufnahme max. 
Akkumulator 
Inputs 
Outputs 
Luftfeuchtigkeit 
Montageart 
Schaltleistung max. 
Schraubklemmen Drahtquerschnitt max. 
Stromaufnahme typisch 
Versorgungsspannung Alarmgeberkreise 
Ausgangsstrom max. 
Versorgungsspannung 
V
Versorgungsspannung_a 
Stromaufnahme bei 24 V 
Nennausgangsleistung 
min. Ausgangsstrom 
max. Ausgangsstrom 

Additional information

The touch display and operating unit cannot be used behind the adapter module ADP-N3E-EDP. The device must be externally power-supplied.

Languages supported: Czech, Dutch (Netherlands), English, French (France), German, German (Austria), Polish, Romanian, Russian (Cyrillic), Slovakian, Turkish

Product Data Sheet

Version: 2024-11

Language:
English
Doc extension:
pdf