Features
- Input: EDP protocol
- Output: ESPA protocol
Adapter module ADP-N3EU-EDP
Microprocessor-based device for installation in FlexES fire alarm panel. In compliance with DIN 14675, the RS 485 interface of the fire alarm panel can be used as a redundant data bus with this adapter if the fire brigade indicating panel FAT 3000 is used for the fire brigade’s initial information. Supplementary texts can be programmed via PC (> 4,000 texts).The ESPA interface facilitates a direct connection which is not galvanically isolated to a telecommunication system, paging system or nurse call system.
- Part-No.:
- FX808381
Technical Data
- Versorgungsspannung
- V
- Material
- Operation temperature
- Tasterbelastung
- Operating voltage
- 10 ... 30 V DC
- Operating voltage
- V DC
- Quiescent current
- approx. 40 mA
- Quiescent current @ 12 V DC
- Quiescent current @ 24 V DC
- approx. 40 mA
- Alarm current @ 12 V DC
- Current consumption
- Current consumption
- Current consumption @ 12 V DC
- Current consumption @ 24 V DC
- Current consumption for ext. devices
- A
- Current consumption
- mA
- Battery capacity
- Contact load relay
- Display
- Frequency of flash
- Hz
- Lighting energy
- Resolution
- Screen diagonal
- cm
- Data transmission speed
- Connection terminal
- max 2 x 0.8 mm²
- Ambient temperature
- 0 °C ... 50 °C
- Storage temperature
- -10 °C ... 60 °C
- Air humidity
- Air humidity
- Type of protection
- Installation
- Housing
- Color
- Empfohlene_Raumtemperatur
- Weight
- approx. 100 g
- Weight
- Cable length
- m
- Rückseitige Bodenplatte
- mm
- Dimensions
- W: 80 mm H: 150 mm D: 32 mm
- Declaration of Performance
- Maximale_Ladung
- Temperature range
Downloads
