Features
- Max. Detection range up to 150 m with standard light source
- 3 levels of sensitivity possible (35 %, 45 %, 60 %)
- Easy DIP switch configuration
- Pollution Monitoring
OSID Imager - 7° coverage
Imager for use with OSID emitter (Part No.: 761303 – 761305).
Image sensor / receiver for smoke detection for open spaces, evaluation. Two light sources (IR and UV), optical filters, high-speed image capture and intelligent software algorithms to increase the noise immunity and safety from erroneous / false alarms, 1 light source can be connected, via sensors and DIP switch individually configurable.
- Part-No.:
- 761300
- Approval:
- VdS, FM
Technical Data
- Operating voltage
- 20 ... 30 V DC
- Contact Ausgänge
- Contact Current
- Sensoren pro Hub
- Sensoren pro Controller
- Hubs pro Controller
- Angesaugte Lufttemperatur
- Länge der Abzweigleitung
- Lineare Rohrlänge
- Ansaugöffnungen
- Operation temperature
- Anzahl_der_Relaisausgänge
- Indication Output voltage
- Nominal frequency
- Hz
- Rated voltage
- Operating voltage
- V DC
- Operating voltage
- Voltage supply
- Quiescent current
- Quiescent current @ 9 V DC
- Quiescent current @ 12 V DC
- Quiescent current @ 19 V DC
- Quiescent current @ 24 V DC
- Ruhestrom @ 28 V DC_comp
- Quiescent current @ FACP battery
- Quiescent current @ FACP battery
- Current consumption
- Alarmstrom @ 28 V DC_comp
- Current consumption @ 12 V DC
- Current consumption @ 24 V DC
- approx. 8 mA @ 1 imager
- Current consumption
- Power consumption @ 5 V DC
- Power consumption @ 12 V DC
- Power consumption @ 24 V DC
- Alarm current @ 9 V DC
- Alarm current @ 12 V DC
- Alarm current @ 24 V DC
- Starting current @ 24 V DC
- Starting current
- Current consumption in the case of failure
- Output current
- A
- Power consumption
- Current consumption for ext. devices
- A
- Battery capacity
- Contact load
- Contact load relay
- Sensitivity
- Sound level
- Sound level @ 24 V DC
- Display
- Frequency of flash
- Hz
- Lighting energy
- Range
- Connection terminal
- Maximum tube length
- Area to be monitored
- Height to be monitored
- Alignment angle
- Unempfindlichkeit gegenüber Gebäudebewegungen
- Air velocity
- Application temperature
- Response temperature
- Ambient temperature
- -10 °C ... 55 °C
- Storage temperature
- Wavelength
- nm
- Connection
- Sampled Air Temperature
- Air humidity
- < 10 %
- Air humidity
- Ex-category
- Ex. protection
- Type of protection
- IP 44 (electronic)
- IP 66 (optical housing)
- Housing
- Type
- Material
- Color
- Weight
- approx. 651 g
- Weight
- Luftfeuchtigkeit
- Cable length
- m
- Maximum sensor length
- m
- Rückseitige Bodenplatte
- mm
- Detector specification
- EC-type examination certificate
- Specification
- Dimensions
- W: 208 mm H: 136 mm D: 96 mm
- Declaration of Performance
- Approval
Accessories
761310 OSID Installation Kit
761303 Emitter - Standard Power, battery version
761304 Emitter - Standard Power, wired at 24 V DC
761305 Emitter - High Power, wired at 24 V DC
Downloads
Product data sheet Linear smoke detector OSID
- Language:
- English
- Part No.:
- D800000.G0
- Doc extension:
- File Size:
- 898 kB
D800000_D_Produktinformation
- Language:
- German
- Part No.:
- D800000
- Doc extension:
- File Size:
DoP-25993_00, Third party detector for ESSER-Fire Alarm Panel - OSID
Version: 06.2013
- Language:
- English
- Part No.:
- 761300
- Doc extension:
- File Size:
- 215 kB
Safety Data Sheet Battery Alkaline Energizer for OSID
Version: 01.2017
- Language:
- English
- Part No.:
- 80353F
- Doc extension:
- File Size:
- 95 kB