The VESDA-E VES series of smoke detectors bring additional to the latest and most advanced detection technology to provide very early warning and the best nuisance alarm rejection, a valve mechanism in the inlet manifold and software to control the airflow from the four Sectors (pipes). This configuration enables a single zone to be divided into four separate sectors, for example, distinguishing between separate aisles within a data room. Built on the Flair detection technology and years of application experience, VES detectors achieve consistent performance over their lifetime via absolute calibration. In addition, the VES delivers a range of revolutionary features that provide user value. Flair Detection Technology Flair is the revolutionary new detection chamber that forms the core of VESDA-E VES, providing better detection, fewer nuisance alarms, higher stability, increased longevity and particle characterization. Direct imaging of the sampled particles using a CMOS imager combined with multiple photo-diodes allow vastly more data that can be used to derive actionable information about the observed particles using analytics. Installation, Commissioning and Operation VESDA-E VES is equipped with a powerful aspirator that enables use of a total of 560m (1,837ft) of pipe. Out of box operation is made possible with AutoConfig which allows airflow normalization and AutoLearn Smoke and Flow to be initiated from within the detector. VES is fully supported by the ASPIRE and Xtralis VSC software applications which facilitate ease of pipe network design, system commissioning and maintenance. VESDAnet™ VESDA devices communicate on VESDAnet which provides a robust bi-directional communication network allowing continued redundant operation even during single point wiring failures. VESDAnet enables primary reporting, centralized configuration, control, maintenance and monitoring. Ethernet and WiFi connectivity VESDA-E detectors offer Ethernet and WiFi connectivity as standard features. The detector can be added to a corporate network, allowing WiFi enabled tablet devices and PC’s installed with Xtralis monitoring and configuration software to connect wirelessly to the detector via the network.
VSP-962 VESDA Filter for VEU, VEP, VES
