O2T/FSp multisensor fire detector IQ8Quad with isolator, Nordic

802385.N0 | O2T/FSp multisensor fire detector IQ8Quad with isolator, Nordic

Same as 802385, but Nordic version.

Part-No.:
802385.N0

Technical Data

Common technical data: 
Leistungserklärung 
Rated voltage 
V AC
Rated frequency 
Rated current 
Output current 
Battery capacity 
Operating voltage 
 
Operating voltage 
V DC
Operating voltage 
Quiescent current 
Lichtquelle 
Leuchtfarbe 
 
Quiescent current @ 9 V DC 
μA
Quiescent current @ 12 V DC 
Quiescent current @ 19 V DC 
μA
Quiescent current @ 24 V DC 
Quiescent current @ FACP battery 
Quiescent current @ FACP battery 
Quiescent current 
μA
Current consumption 
Current consumption 
Current consumption @ 12 V DC 
Current consumption @ 24 V DC 
Starting current 
mA
Current consumption in the case of failure 
mA
Current consumption testmode 
mA
Alarm current 
Alarm current 
Alarm current @ 9 V DC 
mA
Alarm current @ 12 V DC 
Alarm current @ 24 V DC 
mA
Alarm current @ 24 V DC 
Alarm current w/o communication curtain 
mA
Power consumption 
Current consumption for ext. devices 
A
Testing capacity 
Battery charging 
Heat detector response threshold 
Load factor 
Contact load relay 
Contact load 
Sound level 
dB
Sound level @ 12 V DC 
Sound level @ 24 V DC 
Sound level 
No. of detector/zone 
Circuit 
Display 
Operation indicator 
Alarm display 
Fault display 
Frequency of flash 
Lighting energy 
Flash color 
Luminous intensity 
 
 
Signal flashing lamp 
Range 
Connection terminal 
CO pre-alarm 
ppm
CO alarm 
ppm
Area to be monitored 
Height to be monitored 
Air velocity 
Sensitivity 
Application temperature 
Ambient temperature 
Storage temperature 
Air humidity 
< 95 %
Air humidity 
Type of protection 
 
Protection class 
Ex. protection 
Category 
Housing 
Material 
 
Installation 
Signal Range 
Mounting height wall 
Room width 
Category ceiling 
Mounting height ceiling 
Room diameter 
Color 
 
Weight 
Weight 
Optisches_Signalbild 
Lebensdauer_optisch 
Drehfrequenz 
Abmessungen 
Content 
Cable length 
m
Maximum sensor length 
m
Detector specification 
DIBt approval 
Specification 
 
Cable diameter 
mm
Cable entry 
Maximum tube length 
Dimensions 
 
Length 
Declaration of Performance 
Konformität 

Accessories

767800 Mounting bracket

805590 Standard detector base for IQ8Quad

Additional information

All IQ8Quad detectors with built-in alarm devices and IQ8Alarm Plus can only be operated on the powered loop. For physical reasons, an increased sound level leads to a higher current consumption rate of the alarm device and the corresponding load factor must be considered when calculating the maximum number on the loop. Altogether up to 127 bus devices per loop can still be connected.

Please consider that extra training is required when dealing with IQ8Quad with a built-in alarm device IQ8Alarm Plus. The training includes installation planning and commissioning techniques. For further information take a look at our training brochure. Information concerning the calculation can be found in the "Project Planning Support“ chapter.

Further data can be viewed in the accessories section for automatic detectors. For calculating the battery capacity of FACP, the detector data "quiescent current @ FACP battery" can be added.

Special colors on demand!

Scope of delivery

Programmed with 5 languages: Norwegian, Swedish, Finnish, Danish and English

Downloads

Produktdatenblatt
Ausschreibungstext

Product Data Sheet

Version: 2024-07

Language:
English
Doc extension:
pdf