Features
- 9 tone sequences can be programmed:
- Continuous tone
- Alternating tone
- Intermittent tone
- Siren
- Fire alarm (different national regulations taken into account)
Ex signaling device DS10, 12 V DC
The conventional signaling device is especially suitable for hazardous industrial areas zone 2 and 22). The robust aluminum die-cast housing is resistant to chemicals and environmental influences. The DS10 complies with the technical requirements of DIN 33404 - 3 "hazard signals for workplaces".
- Part-No.:
- 045040
- Approval:
- VdS (FDT), ATEX
Technical Data
- Common technical data:
- Leistungserklärung
- Rated voltage
- V AC
- Rated frequency
- Rated current
- Output current
- Battery capacity
- Operating voltage
- 11 ... 14 V DC
- Operating voltage
- V DC
- Operating voltage
- Quiescent current
- Lichtquelle
- Leuchtfarbe
- Quiescent current @ 9 V DC
- μA
- Quiescent current @ 12 V DC
- Quiescent current @ 19 V DC
- μA
- Quiescent current @ 24 V DC
- Quiescent current @ FACP battery
- Quiescent current @ FACP battery
- Quiescent current
- μA
- Current consumption
- Current consumption
- Current consumption @ 12 V DC
- approx. 300 mA
- Current consumption @ 24 V DC
- Starting current
- mA
- Current consumption in the case of failure
- mA
- Current consumption testmode
- mA
- Alarm current
- Alarm current
- Alarm current @ 9 V DC
- mA
- Alarm current @ 12 V DC
- Alarm current @ 24 V DC
- mA
- Alarm current @ 24 V DC
- Alarm current w/o communication curtain
- mA
- Power consumption
- Current consumption for ext. devices
- A
- Testing capacity
- Battery charging
- Heat detector response threshold
- Load factor
- Contact load relay
- Contact load
- Sound level
- dB
- Sound level @ 12 V DC
- 112 dB(A) @ DIN tone
- Sound level @ 24 V DC
- Sound level
- No. of detector/zone
- Circuit
- Display
- Operation indicator
- Alarm display
- Fault display
- Frequency of flash
- Lighting energy
- Flash color
- Luminous intensity
- Signal flashing lamp
- Range
- Connection terminal
- CO pre-alarm
- ppm
- CO alarm
- ppm
- Area to be monitored
- Height to be monitored
- Air velocity
- Sensitivity
- Application temperature
- Ambient temperature
- -25 °C ... 55 °C
- Storage temperature
- -40 °C ... 70 °C
- Air humidity
- < 90 %
- Air humidity
- Type of protection
- IP 66, IP 67
- Protection class
- Ex. protection
- Category
- Housing
- Material
- aluminum die cast
- Installation
- Signal Range
- Mounting height wall
- Room width
- Category ceiling
- Mounting height ceiling
- Room diameter
- Color
- red, similar to RAL 3000
- Weight
- Weight
- approx. 1,95 kg
- Optisches_Signalbild
- Lebensdauer_optisch
- Drehfrequenz
- Abmessungen
- Content
- Cable length
- m
- Maximum sensor length
- m
- Detector specification
- DIBt approval
- Specification
- EN 54-3
- Cable diameter
- mm
- Cable entry
- Maximum tube length
- Dimensions
- W: 150 mm H: 150 mm D: 143 mm
- Length
- Declaration of Performance
- Konformität
Additional information
According to the conformity declaration, the alarm devices can be used in zones 2 and 22.
See tone table on our download website.
Downloads
Brochure Ex products
Version: 05.2016
- Language:
- German
- Part No.:
- 797352
- Doc extension:
- File Size:
045040_Ex-Signalgeber_D_German
- Language:
- German
- Doc extension:
- File Size:
Brochure Ex Products
Version: 05.2016
- Language:
- English
- Part No.:
- 797352.G0
- Doc extension:
- File Size:
- 1681 kB
DoP01CPR2013-06-18, 045040
- Language:
- Multilingual
- Doc extension:
- File Size:
- 1271 kB